Versatile Filtered Power Entry Module
Power Entry Module with EMC- Filter FN370
Versatile Filtered Power Entry Module
- Rated currents up to 6 A
- Single or dual-fuse holder
- Fuses Ã6.3 x 32 mm or Ã5 x 20 mm
- Voltage selector 100/120/230/240 V
- General purpose application
- Optional medical versions (B type)
Features and Benefits
Good conducted attenuation performance, based on chokes with high saturation resistance and excellent thermal behavior
Rear/front or snap-in mounting
Single or dual-fuse holder
USA Ã6.3 x 32 mm or EU Ã5 x 20 mm fuses
Two attenuation performance ranges
Voltage selector 100/120/230/240 V
Custom-specific versions are available on request
Typical Applications
Portable electrical and electronic equipment
Consumer goods
EDP and office equipment
Single-phase power supplies, switch-mode power supplies
Test and measurement equipment
Medical equipment
Technical Specifications
Maximum continuous operating voltage
250 VOLT, 50/60 Hz
Operating frequency
DC to 400 Hz
Closed internal contact corresponding to
 
1st
a, c, e
2st
b, c, e
3st
3st a, d
Rated currents
2 to 6 A @ 40°C max.
4st
b, d
High potential test voltage
P –> PE 2000 VAC for 2 sec (standard types)
P –> PE 2500 VAC for 2 sec (B types)
P –> N 760 VAC for 2 sec
Protection category
IP 40 according to IEC 60529
Temperature range (operation and storage)
-25°C to +85°C (25/85/21)
Design corresponding to
UL 1283, CSA 22.2 No. 8 1986, IEC/EN 60939
Flammability corresponding to
UL 94 V-2 or better
Function
Series/parallel
Voltage selector description
VOL-SE 4SP-4
Voltage marking
 
1st
100
2nd
120
3rd
230
4st
240
* Other selected voltage marking on request.
