FN9222E
General Performance EMC/EMI Filter with Earth Line Choke
IEC Inlet Filters FN9222E

General Performance EMC/EMI Filter with Earth Line Choke
- Rated currents up to 15 A
- Excellent performance/size ratio
- Integrated earth line choke
- Complies with IEC/EN 60601-1
- Snap-in versions (S and S1 type)
- Optional wide mounting flanges
Features and Benefits
Exceptional conducted attenuation performance, based on chokes with high saturation resistance and excellent thermal behavior
Rear/front or snap-in mounting
FN 9222 B versions comply with the requirements of 1MOP acc. to IEC/EN 60601-1 for creepage and clearance, leakage current and high potential testing
Wide mounting flanges available
Different output connections offering maximum flexibility for assembly
Without earth line choke see FN 9222 data sheet
Custom-specific versions are available on request
Typical Applications
Portable electrical and electronic equipment
Small to medium-sized machines and household equipment
Single-phase power supplies, switch-mode power supplies
Test and measurement equipment
Medical equipment
Rack mounting equipment
Technical Specifications
Maximum continuous operating voltage
250 VAC, 50/60 Hz
Temperature range (operation and storage)
-25°C to +85°C (25/85/21)
Protection category
IP 40 according to IEC 60529
Design corresponding to
UL 1283, CSA 22.2 No. 8 1986, IEC/EN 60939
Flammability corresponding to
UL 94 V-2 or better
Surge pulse protection (Z type)
Helps compliance to IEC61000-4-5 (Differential Mode only)
Operating frequency
dc to 400 Hz
DC to 400 Hz
Rated currents
1 to 15 A @ 50°C max.
Approvals by rated current
1 to 10 A (ENEC, CQC)
1 to 15 A (UL, CSA)
High potential test voltage
P –> PE 2000 VAC for 2 sec (standard types)
P –> PE 2500 VAC for 2 sec (B types)
P –> N 1000 VAC for 2 sec