High Performance Power Entry Module with Fuses
Power Entry Module with EMC- Filter FN9262
High Performance Power Entry Module with Fuses
- Rated currents up to 10 A
- Integrated dual fuse holder
- Optional reduced leakage current versions (A/B type)
- Complies with IEC/EN 60601-1
- Snap-in versions (S type)
- High attenuation performance
- NEW: Wire leads option
Features and Benefits
Exceptional conducted attenuation performance, based on chokes with high saturation resistance and excellent thermal behavior
FN9262B versions comply with the requirements of 1MOP acc. to IEC/EN 60601-1 for creepage and clearance, leakage current and high potential testing
Versions up to 10 A are available with fuse holder for two fuses
Custom-specific versions are available on request
Typical Applications
Exceptional conducted attenuation performance, based on chokes with high saturation resistance and excellent thermal behavior
FN9262B versions comply with the requirements of 1MOP acc. to IEC/EN 60601-1 for creepage and clearance, leakage current and high potential testing
Versions up to 10 A are available with fuse holder for two fuses
Custom-specific versions are available on request
Technical Specifications
Operating voltage
250 VAC, 50/60 Hz
High potential test voltage
P –> PE 2000 VAC for 2 sec (standard types)
P –> PE 2500 VAC for 2 sec (B types)
P –> N 760 VAC for 2 sec
Fuse holder
2 fuses (Ø5 x 20 mm) (certified to IEC 60127-6), power acceptance 1.6W @ Ta 23°C per pole
Protection category
IP 40 according to IEC 60529
Temperature range (operation and storage)
-25°C to +85°C (25/85/21)
Design corresponding to
UL 60939-3, CSA Std C22.2 No. 8-13, IEC/EN 60939-3, GB/T 15287, GB/T 15288
Flammability corresponding to
Fuseholder plastic: UL 94 V-0
Inlet plastic: UL 94 V-0
Operating frequency
DC to 400 Hz
MTBF @ Rated amb. Temp./Voltage (Mil-HB-217F)
2,100,000 hours
Rated currents
1 to 10 A @ 40°C max
