General Purpose Power Entry Module with Switch
Power Entry Module with EMC- Filter FN9264
General Purpose Power Entry Module with Switch
- Rated currents up to 10 A
- High quality 2-pole rocker switch
- Optional reduced leakage current versions (A/B type)
- Complies with IEC/EN 60601-1
- Snap-in versions (S type)
- Good attenuation performance
Features and Benefits
Excellent conducted attenuation performance, based on chokes with high saturation resistance and good thermal behavior
High quality 2-pole rocker switch for all-pole disconnection
Faston terminals for easy assembly
FN 9264 B versions comply with the requirements of 1MOP acc. to IEC/EN 60601-1 for creepage and clearance, leakage current and high potential testing
As flange mount and snap-in types available
Typical Applications
Portable electrical and electronic equipment
EDP and office equipment
Single-phase power supplies
Switch-mode power supplies
Test and measurement equipment
Medical electrical devices (MD) and In-Vitro Diagnostic (IVD) medical devices
Technical Specifications
Maximum continuous operating voltage
250 VAC, 50/60 Hz
Operating frequency
DC to 400 Hz
Design corresponding to
UL 60939-3, CSA Std C22.2 No. 8, IEC/EN 60939-3, GB/T15287, GB/T15288
Flammability corresponding to
UL 94 V-2 or better
Function
2-pole, dark not illuminated
Marking I – 0
Electrical specifications
Inrush current 100 A
50,000 on-off operations for 10 A according to EN 610581-1
Switch ratings
 
Europe (ENEC)
10 A (4 A), 250 VAC* 5E4
USA (UL)
20 A, 125 VAC 1 HP
250 VAC 2 HP
Rated currents
1 to 10 A @ 40°C max.
High potential test voltage
P –> PE 2000 VAC for 2 sec (Standard)
P –> PE 2500 VAC for 2 sec (B-types)
P –> N 760 VAC for 2 sec
Protection category
IP 40 according to IEC 60529
Temperature range (operation and storage)
-25°C to +85°C (25/85/21)
-25°C to +85°C (25/85/21)
* Value in () relates to the inductive current charge: cos(phi) = 0.65
