Power Entry Module with EMC- Filter FN9266
High Performance Power Entry Module with Switch
- Rated currents up to 10 A
- High quality 2-pole rocker switch
- Optional reduced leakage current versions (A/B type)
- Complies with IEC/EN 60601-1
- Snap-in versions (S type)
- High attenuation performance
Features and Benefits
Typical Applications
Technical Specifications
Operating voltage
250 VAC, 50/60 Hz
High potential test voltage
P –> PE 2000 VAC for 2 sec (Standard)
P –> PE 2500 VAC for 2 sec (B-types)
P –> N 760 VAC for 2 sec
Rated currents
1 to 10 A @ 40°C max.
Protection category
IP 40 according to IEC 60529
Temperature range (operation and storage)
-25°C to +85°C (25/85/21)
Design corresponding to
UL 60939-3, CSA Std C22.2 No. 8, IEC/EN 60939-3, GB/T 15287, GB/T 15288
Flammability corresponding to
Switch plastic: UL 94 V-0
Inlet plastic: UL 94 V-0
Switch plastic: UL 94 V-0
Switch plastic: UL 94 V-0
Switch plastic: UL 94 V-0
Switch plastic: UL 94 V-0
Switch plastic: UL 94 V-0
Switch plastic: UL 94 V-0
Switch plastic: UL 94 V-0
Operating frequency
DC to 400 Hz
MTBF @ Rated amb. Temp./Voltage (Mil-HB-217F)
2,100,000 hours
Function
2-pole, dark not illuminated
Marking I – 0
Electrical specifications
Inrush current 100 A
50,000 on-off operations for 10 A according to EN 610581-1
Switch ratings
 
Europe (ENEC)
10 A (4 A), 250 VAC* 5E4
16 A (4 A), 250 VAC* 1E4
16 A (4 A), 250 VAC* 1E4
16 A (4 A), 250 VAC* 1E4
16 A (4 A), 250 VAC* 1E4
16 A (4 A), 250 VAC* 1E4
16 A (4 A), 250 VAC* 1E4
USA (UL)
20 A, 125 VAC 1 HP
250 VAC 2 HP
