Ultra Compact and Versatile Filtered Power Entry Module
Power Entry Module with EMC- Filter FN9280
Ultra Compact and Versatile Filtered Power Entry Module
- Single stage filter
- Ultra compact design
- Rated currents up to 10 A
- dual-fuse holder
- Fuses Ã5x20 mm
- 2-pole rocker switch
- Good attenuation performance
- Faston or spring cage terminals
Features and Benefits
Good conducted attenuation performance, based on chokes with high saturation resistance and excellent thermal behavior
Deep-drawn iron-sheet housing for best possible shielding against magnetic fields
Rear/front flange mounting or snap-in versions
Dual and additional spare fuse holder
2-pole rocker switch
Faston or spring cage terminals
FN 928X B versions comply with the requirements of 1MOP acc. to IEC/EN 60601-1
All versions according IEC/EN 62368-1
Typical Applications
Portable electrical and electronic equipment
Consumer goods
EDP and office equipment
Single-phase and switch-mode power supplies
Test and measurement equipment
Medical electrical devices (MD) and In-Vitro-Diagnostics (IVD) equipment
Audio/Video, information and communication technologies
Technical Specifications
Maximum continuous operating voltage
250 VAC, 50/60 Hz
Flammability corresponding to
UL 94 V-2 or better
Operating frequency
DC to 400 Hz
Rated currents
1 to 10 A
Temperature range (operation and storage)
– 25°C to +85°C (25/85/21)
Design corresponding to
UL 1283, CSA 22.2 No. 8 1986, EN 60939, EN 60950, EN 60601-1, UL 544, EN 60320
Protection category
IP 40 according to IEC 60529 (front side)
Switch ratings
 
Europe (ENEC)
10 A (4 A), 250 VAC*
Rated currents
1 to 10 A @ 40°C max
Mechanical life
50,000 cycles
Electrical specifications
Inrush current 82 A
6,000 on-off operations according to UL 1054
10,000 on-off operations according to ENEC
Fuse holder
2 fuses (Ø5 x 20 mm) max. 250 V (certified to IEC 60127-6), power acceptance 1.6W @ Ta 23°C per pole
* Value in () relates to the inductive current charge: cos (phi) = 0.65
