KAHB 1500
KAHB 1500 Metal Clad Braking Resistor
-
Series
KABH
-
Compliance
RoHS
-
Marked
CE
Specifications
-
Rated Power (W)
1500
-
Resistance Range
6 Ω – 2K Ω
-
Termination type
Screw fitment, Cable leadout
-
Application
Anti – Surge / Pulse Withstanding, Discharge, Dynamic braking, High Power, Starting and Regulating, Stator Series
-
Construction
Wire Wound
-
Mounting
Chassis/ Heat Sinkable Mount, Screw Mount
-
Characteristics
Condition
Compliance
-
Tolerance
For Values less than 1Ω
For Values greater than 1Ω± 5% to ±10%
± 1% to ±10% -
Temperature Coefficient
–
±200 PPM/°C max
-
Insulation Resistance
Dry/Normal
>1000MΩ min.
-
Endurance
1.5Hrs ON, 0.5Hrs OFF for 500Hrs
@Room TemperatureΔR< ±(5% + 0.05Ω)
-
Short term overload
10 x Rated Power for 5 sec
ΔR< ±(2% + 0.05Ω)
-
Operating Temperature
-25°C to 250°C
-
Humidity
40°C, 90% Rh, 240Hrs
ΔR< ±(3% + 0.05Ω)
-
Dielectric Strength
3kVAC rms for 1minute
No Breakdown or Flashover
-
Excellent Electrical stability, reliability and mechanically very rigid.
-
Non Inductive version available.
-
Termination style can be UL Approved Cables or Flat terminals for screw fixing.
-
Custom terminations & Vertical mounting arrangements possible.
-
Thermal cutout can be provided on request.
-
Stacking solution available.
-
Brake resistors for VFDs
-
General Electrical applications including for Discharge ,Pre charge
-
Elevators, Lifts and Cranes
-
Electrical Panels