KSA 10 Silicon Coated Resistors
-
Series
KSA
-
Compliance
RoHS
-
Marked
CE
Specifications
-
Rated Power (W)
10
-
Resistance Range
R10 Ω – 56K Ω
-
Termination type
Solderable
-
Application
Anti – Surge / Pulse Withstanding, Discharge, Experimenting and testing
-
Construction
Wire Wound
-
Mounting
Axial Leaded / Through Hole
-
Characteristics
Condition
Compliance
-
Tolerance
R value < 1Ω
R value > 1Ω±5%
±1%, ±2% and ±5% -
Temperature Coefficient
–
< ± 100PPM/°C
-
Insulation Resistance
Dry/Normal @500V DC
>1000 MΩ
-
Change in Resistance
– Rated Load
– Short term overload
– Load life
Rated load for 30 mins at room temp
5x Rated power for 5 secs
Rated wattage 1.5 Hour ON – 0.5 Hour
OFF for 1000 Hours
< ± (2% + 0.05Ω)
< ± (2% + 0.05Ω)
< ± (5% + 0.05Ω) -
Solderability (where applicable)
350°C for 2 to 3sec
95% coverage
-
Solvent test
Trichloroethane, IPA
No effect on marking
-
Wide range of resistance values available.
-
Non-inductive versions on offer.
-
Good electrical stability, reliability and mechanically very rigid.
-
Custom termination & mounting arrangements possible.
-
RoHS Compliant
-
General Electronic and Electrical circuits
-
Pre charge, Discharge applications
