KSE 1000 Silicon Coated Edge Wound Resistors
Radial Type – 0.27 Ω – 20 Ω – 1000W – 40PPM. KSE – Series
-
Series
KSE
-
Compliance
RoHS
-
Marked
CE
Specifications
- Rated Power (W) 1000
- Resistance Range 0.27 Ω – 20 Ω
- Termination type Solderable, Screw Fitment, Cable Leadout
- Application Anti – Surge / Pulse Withstanding, Discharge, Dynamic braking, Filter Resistors, High Power, Load resistors, Starting and Regulating, Stator series, Experimenting and testing
- Construction Variable Resistors, Wire Wound
- Mounting Radial Type
- Characteristics Condition Compliance
- Continuous Power Rated power @25°C 280°C Temperature rise max
- Tolerance R value < 1Ω R value > 1Ω ±5% & ±10% ±1%, ±2%, ±5% & ±10%
- Temperature Coefficient – ± 40PPM/°C
- Insulation Resistance Dry/Normal @500V DC >100MΩ
- Change in Resistance – Short term overload – Load life 10 x Rated voltage for 5 secs Rated waDage 1.5 Hour ON – 1.5 Hour OFF for 1000 Hours < ± (2% + 0.05Ω) < ± (1% + 0.05Ω)
- Operating Temperature -55°C to 200°C –
- Dielectric Voltage 1kV for 1 minute No Breakdown
- Wide range of resistance values available.
- Fixed, Variable versions on offer.
- High thermal capacity – suitable for high pulse applications.
- Good electrical stability, reliability and mechanically very rigid.
- Custom termination & mounting arrangements possible.
- General Electrical applications including for continuous power application
- Pre charge, Discharge applications
