KSE 90 Silicon Coated Edge Wound Resistors
Radial Type - 0.15 Ω - 7.5 Ω - 90W - 40PPM. KSE - Series
-
Series
KSE
-
Compliance
RoHS
-
Marked
CE
Specifications
- Rated Power (W)90
- Resistance Range0.15 Ω – 7.5 Ω
- Termination typeSolderable, Screw Fitment, Cable Leadout
- ApplicationAnti – Surge / Pulse Withstanding, Discharge, Dynamic braking, Filter Resistors, High Power, Load resistors, Starting and Regulating, Stator series, Experimenting and testing
- ConstructionVariable Resistors, Wire Wound
- MountingRadial Type
- CharacteristicsCondition Compliance
- Continuous PowerRated power @25°C 280°C Temperature rise max
- ToleranceR value < 1Ω R value > 1Ω ±5% & ±10% ±1%, ±2%, ±5% & ±10%
- Temperature Coefficient- ± 40PPM/°C
- Insulation ResistanceDry/Normal @500V DC >100MΩ
- Change in Resistance – Short term overload – Load life10 x Rated voltage for 5 secs Rated waDage 1.5 Hour ON – 1.5 Hour OFF for 1000 Hours < ± (2% + 0.05Ω) < ± (1% + 0.05Ω)
- Operating Temperature-55°C to 200°C –
- Dielectric Voltage1kV for 1 minute No Breakdown
- Wide range of resistance values available.
- Fixed, Variable versions on offer.
- High thermal capacity – suitable for high pulse applications.
- Good electrical stability, reliability and mechanically very rigid.
- Custom termination & mounting arrangements possible.
- General Electrical applications including for continuous power application
- Pre charge, Discharge applications
